|
Post by 4rfam on Jan 13, 2019 10:31:53 GMT -6
I have a question about a Husqvarna 141 chainsaw I'm trying to fix for a friend. Sometimes it will start and run good other time it want and backfires through the carb and exhaust. I have replaced the carb with a new one, muffler screen is not stopped up and coil works the spark plug fires. Two thing I noticed first the flywheel has a built in keyway, when I put it on the shaft it has a little play side to side maybe a 1/16th either way before I tighten it down. Second on the outside surface it has three magnets side by side. touching them with a screwdriver the center one is very strong and two outside ones are weak. Is that normal or should they be the same. Also we have replaced the cylinder, piston, ring, cam bearings and seals. It also has a new coil , basically it new. built in 2004 Any help I'm lost unless it the flywheel.
hpd553@yahoo.com
|
|
|
Post by ifipinaqu on May 23, 2019 8:58:03 GMT -6
|
|
|
Post by isigikju on May 23, 2019 10:54:45 GMT -6
|
|