CHAINSAW MAN
Just Started
TWO STROKE SO SIMPLE BUT YET SO COMPLICATED
CHAINSAW MASSUSE
Posts: 21
|
Post by CHAINSAW MAN on Feb 18, 2013 2:54:18 GMT -6
First you need to get a clear or semitransparent 5 gallon jug add 1 gallon water then fill with 4 gallons of 91 octane fuel. Mix together and let it sit until the gas separates from the water. The alcohol will mix with the water. Then you can pour or siphon off the gas. Mix gas with your favorite two cycle oil and enjoy alcohol free gas.
|
|
|
Post by stihl090 on Feb 19, 2013 1:15:11 GMT -6
First you need to get a clear or semitransparent 5 gallon jug add 1 gallon water then fill with 4 gallons of 91 octane fuel. Mix together and let it sit until the gas separates from the water. The alcohol will mix with the water. Then you can pour or siphon off the gas. Mix gas with your favorite two cycle oil and enjoy alcohol free gas. I'm going to try this tomorrow after work. I'll let you know how it turns out.
|
|
|
Post by stihl090 on Feb 21, 2013 1:32:16 GMT -6
Well it worked I didn't think it would but it did. Thanks now I don't have to worry so much.
|
|
chainsawgirl
Just Started
Cutting wood to heat my home.
Posts: 8
|
Post by chainsawgirl on Feb 24, 2013 2:13:51 GMT -6
I told my Dad and my brother about this they laughed at me so I'm going to try it Sunday hope it works or I'm not going to hear the end of it
|
|
chainsawgirl
Just Started
Cutting wood to heat my home.
Posts: 8
|
Post by chainsawgirl on Feb 24, 2013 23:16:42 GMT -6
Well this is what I did. I took a glass gallon jug put one quart of water in it. Then marked the side of the jar with a sharpie. Then added two quarts of 91 octane from Shell. Shook it up and let it sit. Came back in two hours checked the mark it was below the water line. I the n showed it to my brother and Dad. They poured off the gas and mixed in 2cycle oil and ran it in our MS170 it worked great. Made a believer out of three more people. Can't wait to spread the word.
|
|